The belt conveyor in
ZM Automation is mainly used for continuously or interstitially
convening powder and granular materials. It applies to the height
difference in transportation and can achieve continuous transportation,
which is used for horizontal conveyor and other connected devices; The
angle of elevating conveyor belt is not more than 13 degrees in general
situation.
Features of Belt Conveyor:
The belt conveyor
in ZM Automation can transport all kinds of materials efficiently and
economically. During the production, the belt conveyor can act as a link
among the machines, realize the continuity and automation of the annual
ring and increase the productivity rate as well as reduce the labor
intensity. The belt moves according to the principle of friction drive,
which has the advantages of large transport capacity, simple structure,
easy repair and normal components. Furthermore, since the belt and the
materials have little relative motion, the noise as well as the energy
consumption becomes very low. In addition, since the structure is
simple, it is easy to repair.
Main Structure of Belt Conveyor:
The belt conveyor
is mainly made up of the rack, belt, belt roller, tensioning device and
other components. The body of the machine is made of connected
high-quality steel board, the surface of which is slant. The belt roller
and carrier roller are on the rack, used for driving and supporting the
transmission belt. The two driving ways are reduction motor driver and
electric roller driver.
The belt conveyor can work within the temperatures ranging from 20℃ to 40℃. The temperature of the transmission materials should be below 50℃
没有评论:
发表评论